Pc Scop.

Måle udstyr
Jer har købt et USB PC Oscilloscop 2 X 60 Mhz med Spectrum analyser og Transint recorder.
hvad kan sådan en fætter så.:
timebase: 20ns to 100ms per division
trigger source: CH1, CH2, EXT or free run
trigger edge: rising or falling
trigger level: full-screen adjustable 
step interpolation: linear or smoothed
markers for: voltage and frequency
input range: 5mV to 2V/division
input sensitivity: 0.15mV display resolution
auto set-up function and X10 option
pre-trigger function
readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
recording length: 4K samples / channel
real time sampling frequency: 1.25kHz to 50MHz
sampling frequency for Repetitive signals: 1GHz
spectrum analyzer: 
frequency range: 0...1.2kHz to 25MHz
linear or logarithmic time scale
operating principle: FFT (Fast Fourier Transform)
FFT resolution: 2048 lines
FFT input channel: CH1 or CH2
zoom function 
markers for amplitude and frequency.
transient recorder: 
time scale: 20ms/div to 2000s/div
max. recording time: 9.4hours/screen
automatic data storage
automatic recording for more than 1 year
max. number of samples: 100/s
min. number of samples: 1 sample / 20s
markers for time and amplitude
recording and display of screensrecording and display of screens
general information: 
inputs: 2 channels, 1 external trigger input
input impedance: 1Mohm // 30pF
bandwidth: DC to 60 MHz ±3dB
max. input voltage: 30V (AC + DC)
input coupling: DC, AC and GND
Supply from USB port (500mA)
dimensions: 8.2 x 2.2 x 7"
minimum system requirements: 
IBM compatible PC
needs Win98SE or higher*
SVGA display card (min. 800x600, 1024x768 recommended)
USB port 1.1 or 2.0 compatible
CD Rom player
USB PC oscilloscope
2 x 60MHz scope probe (PROBE60S)
USB cable
software on CD
getting started manual
translations on CD